iSTAR eX Features
iSTAR eX Installation and Configuration Guide 1–5
System Components
The iSTAR eX hardware components are housed in a 16-gauge sheet metal
cabinet with a lockable door. The cabinet can be wall mounted.
iSTAR eX hardware components consist of:
iSTAR eX GCM – an embedded microprocessor-based general controller
board. The GCM board provides inputs, relay outputs, open collector
outputs, and Wiegand reader ports.
PMB – a board that provides power management, backups, and RM
reader ports for RM readers, I/8s, and R/8s.
ESD Power Supply - UL Recognized ESD, Model SPS-6.5
12 VDC, 17.2 Ah minimum capacity standby battery
LCD - displays diagnostic and status information
Figure 1.1 shows the standard iSTAR eX hardware and cabinet.
NOTE
The STAREX004-64NPS and STAREX008-64NPS do not contain the ESD
power supply and the 17.2 Ah minimum capacity standby battery.
NOTE
Figure 1.1 is not applicable for the NPS configuration.