Sending Messages to Other ICU Users
iSTAR eX Installation and Configuration Guide 5–39
Sending Messages to Other ICU Users
The Tools command on the main menu includes an option that lets you send
messages to other users who are currently using the ICU.
To send a message to other ICU users
1. From the menu bar, choose Tools>Send ICU Message.
The User Message dialog box opens, as shown in Figure 5.17.
Figure 5.17: User Message Dialog Box
2. Type your message and click Send. The ICU sends the message to all
other ICU users in the subnet.
NOTE
Use the User Message dialog box to notify other users that you are
configuring an iSTAR Classic, iSTAR Pro, or iSTAR eX within a specific
cluster. This “good practice” procedure prevents other users from
configuring the same iSTAR unit and maintains control over iSTAR
addresses.
To Next Page
Loading...
