Tyco iSTAR eX - Copying the ICU Onto a PC or Laptop

Copying the ICU onto a PC or Laptop
5–8 iSTAR eX Installation and Configuration Guide
Copying the ICU onto a PC or Laptop
When you install C•CURE on a server or client workstation, the ICU is
included in the ICU folder.
To use the ICU to configure iSTAR eX, you have to copy the ICU files to a PC
or laptop and then connect the PC or laptop to the same subnet as the iSTAR
eX you want to configure.
Copy the following ICU files from the \ICU directory on the
C•CURE DVD or the ICU directory on a server or client:
 ICU.exe – The executable that runs the ICU.
 iWatch.exe – The executable that provides real-time monitoring of iSTAR
eX controllers.
 icu.chm – The help file for the ICU.
 ReleaseNotes.txt – Information about this release of the ICU.
Be sure to record the location of these files on the PC or laptop so you can find
them later.
Copy iWatch.exe to the same folder as ICU.exe.