iSTAR eX - Support for iSTAR eX 8 Reader Option
iSTAR eX Installation and Configuration Guide 4–39
Using the USB Security Key to Enable Readers 5-8
1. Select Hardware - Controller menu.
2. Select New.
3. Select iSTAR eX sub-type as shown in Figure 4.30. Click OK.
Figure 4.30: Select iSTAReX Panel Type
4. Open the Serial Ports Tab
5. Select the Configure RM Device on COM1 or Configure RM Device on
COM2 option as shown in Figure 4.31.
To Next Page
Loading...
