iSTAR eX Connections
1–24 iSTAR eX Installation and Configuration Guide
Outputs
An output is a software object that associates an event or input with a relay on
iSTAR eX or add-on module. The relay then activates or deactivates devices,
such as flood lights and alarm devices.
Readers
Direct connect Wiegand signaling read heads can be connected to the
GCM connector.
RM reader modules, I/8s, and R/8s can be connected to the PMB.
Wyreless PIMs can be connected to the PMB, as shown in Figure 4.11 on
page 4-18.
To Next Page
Loading...
Need help?
General
