iSTAR eX Network Topology
iSTAR eX Installation and Configuration Guide 2–5
Using NetBIOS and Fully Qualified Domain Names
Configurations where IP addresses are subject to change (leased DHCP
addresses, for example) can connect to the C•CURE system using the
NetBIOS or fully qualified domain name (FQDN). The configuration must
contain a WINS or DNS server, for name/address resolution.
If you are not using DHCP, use the ICU to configure NetBIOS and FQDNs. If
you specify a NetBIOS or FQDN name for a C•CURE host, you must also use
the ICU to supply the IP addresses of the DNS or WINS server.
To Next Page
Loading...
