Viewing the Status Screen
6–6 iSTAR eX Installation and Configuration Guide
GMT Date / Time The date and time expressed in Greenwich Mean
Time or Universal Time. This value is reported each
time the controller is queried, and it is necessary to
click the browser’s Refresh button to update it.
DST YES or NO indicates whether or not the controller
automatically adjusts the local time setting for
Daylight Savings Time when it is in effect.
Boot Date / Time The GMT date and time at which the controller was
last booted.
Elapsed Time Since Boot The amount of time that has passed since the system
was booted.
Total Program Memory The total amount of controller flash ROM memory, in
bytes.
Free Program Memory The number of bytes of controller flash ROM memory
not in use.
Percent Free The percentage of controller flash ROM memory not
in use.
Total Storage Memory The total amount of SDRAM available for C•CURE
access control data.
Free Storage Memory The amount of free SDRAM available for C•CURE
access control data.
Total Physical Memory The amount of SDRAM available on the controller.
Master (or Host)
Connection Status
The status of the connection to the master controller
(for members) or to the host (for masters).
Path to Host Yes or No indicates whether or not the controller has
a communications path to the C•CURE host.
Active Communication
Type
The communication interface that is currently active.
Secondary
Communication Type
Type of communication for secondary connection
between the controller and host. This is shown only if
a secondary connection was configured for the
controller.
Table 6.1: Status Information Description (Continued)
Item Meaning
To Next Page
Loading...
