UEi RACKtangle DNR-12-1G Series User Manual

DNR-12-1G Series RACKtangle

and
DNR-6-1G Series HalfRACK

Data Acquisition Systems
—
User Manual
October 2018
PN Man-DNR-X-1G
© Copyright 1998-2018 United Electronic Industries, Inc. All rights reserved.

UEi RACKtangle DNR-12-1G Series Specifications

General

Number of Channels	12
Model	DNR-12-1G Series
Category	Network Hardware
Mounting	19-inch Rack
Form Factor	Rackmount
Power Supply	100-240V AC, 50/60Hz

Summary

Chapter 2 DNR-12-1G Series RACKtangle System Details

2.2 DNR-12-1G Specifications

Lists detailed technical specifications, environmental, and physical data.

2.3 DNR-12-1G Key Features

2.7 DNR-CPU/NIC Module

Chapter 3 DNR-6-1G Series HalfRACK System Details

3.2 DNR-6-1G Specifications

Lists detailed technical specifications for the HalfRACK system.

3.3 DNR-6-1G Key Features

3.7 DNR-6-1G DNR-CPU/NIC Module

Chapter 4 Installation and Configuration Guide

4.1 Initial Installation Guide

Guides through initial hardware and software setup procedures.

4.2 Initial Boot-up

Describes the process for the first system power-on and boot-up.

4.3 IP Address Overview & Update Procedures

Explains how to manage and update system IP addresses for connectivity.

4.4 Network Configuration

Details various network connection and configuration options.

4.5 Troubleshooting

Provides a checklist for diagnosing and resolving common system issues.

4.6 Updating Firmware

Explains the procedures for updating the system firmware.

Chapter 5 PowerDNA Explorer Software Usage

5.1 Getting Started with PowerDNA Explorer

Introduces the PowerDNA Explorer software and initial setup.

5.2 Overview of the Main Window

5.3 Exploring I/O Boards with PowerDNA Explorer

Guides on using PowerDNA Explorer to interact with and configure I/O boards.

Chapter 6 Programming CPU Board-specific Functions

6.4 Setting and Reading CPU Core Parameters via Serial Port

Details how to configure and read CPU parameters using a serial terminal.