SonixTablet Service Manual 00.053.129, Revision C Chapter 3: System Installation
3-1
CHAPTER 3: SYSTEM INSTALLATION
3.1 INSTALLATION ISSUES AND REQUIREMENTS
3.1.1 Environmental Requirements
Verify the system is to be operated in a room that meets the environmental requirements listed in Table 3-1.
Table 3-1: Environmental Specifications
Table 3-2: Barcode Reader
Table 3-3: Wireless
Caution: Avoid placing the system against walls or structures that may decrease air circulation.
Operational Temperature 50º to 104º F (10º to 40º C)
Operational Humidity 30 to 75% relative humidity
Shipping/Storage Conditions +5° to +122° F (-15° to +50° C)
Shipping/Storage Humidity 10% to 90% (non-condensing)
Shipping/Storage Pressure (kilopascal) 50 kPa to 106 kPa (kilopascal)
Warning: Operate in an indoor environment only, free from moisture, flammable liquids, gases, corrosive
substances, strong electrical or magnetic fields and equipment that generates high frequency waves.
Ultrasonix cannot guarantee the proper performance of the system if used in the above-listed conditions.
Operating Temperature 32º to 104º F (0º to 40º C)
Storage Temperature -40º to 140º F (-40º to 60º C)
Humidity 5% to 95% relative humidity, non-condensing
Light Levels Up to 4842 Lux (foot-candles)
Shock Designed to withstand 1.5 m (5') drops
Contaminants Sealed to resist airborne particulate contaminants
Ventilation None required
Operating Temperature 32º to 104º F (0º to 40º C)
Storage Temperature -4º to 158º F (-20º to 70º C)
Humidity 80% maximum, non-condensing
Note: For more details on the wireless adapter and other peripherals, refer to the manufacturer's User's Guides
included with the system.
To Next Page
Loading...
