Chapter 11: Maintenance 00.053.129, Revision C SonixTablet Service Manual
11-2
11.2 SYSTEM CLEANING
Ultrasonix recommends the following cleaning instructions for all external surfaces, including the cart, cables and connectors.
11.2.1 LCD Display/Touch Screen and Cabinet
11.2.1.1 LCD Display Cabinet
Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe down the cabinet:
• water
• mild detergent (PH level at or near 7) and water solution.
11.2.1.2 LCD Display/Touch Screen
Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe down the cabinet:
• 50:50 isopropyl alcohol and water
• any proprietary glass cleaning solution
• water
• mild detergent (PH level at or near 7) and water solution.
11.2.2 Power Pack
Apply a small amount of one of the following recommended cleaning solutions to a soft, non-abrasive cloth and
wipe the power pack:
• water
• mild detergent (PH level at or near 7) and water solution.
Cautions:
Power off and unplug the system before cleaning.
Do not spill or spray water on the controls, transducer connection receptacle, or transducer ports.
Cautions:
Power off and unplug the system prior to cleaning the LCD display/touch screen.
DO NOT apply cleaning solutions directly to any surface of the system.
Cautions:
Power off and unplug the system prior to cleaning.
DO NOT apply cleaning solutions directly to the power pack.