Chapter 9: Network Configuration 00.053.129, Revision C SonixTablet Service Manual
9-6
To Configure a Wireless Connection (If Available)
1. Tap the touch screen button.
2. Select Administrator > Network > Wireless Settingsā¦.
3. Complete the wireless connection following the onscreen directions in the Wireless Network Connection
dialog.
4. Under Online Support, ensure the Chat Support Enabled check box has been selected.
5. Select OK and exit the menu system.
9.1.3.1 Wireless Communication Test
To Perform a Wireless Communication Test:
1. Tap the touch screen button.
2. Select Online Support. This should connect the system to an Ultrasonix Technical Support Representative.
Notes:
When more than one wireless network is available, consult the IT department to determine which one is relevant
for system operations.
Do not select the Chat Support Enabled checkbox unless an Internet connection is available.
Note: Do not select the Chat Support Enabled checkbox unless an Internet connection is available.
Note: It may be necessary to restart in order for the changes to take affect.
To Next Page
Loading...
