SonixTablet Service Manual 00.053.129, Revision C Chapter 7: Field Service Components
7-3
7.1.2 Importing User Data (As Required)
Once the modulo has been installed, if required, import (restore) the previously-saved User Data from the
removable disk to this system.
The following options are available for import:
• Imaging Presets
• 3D/4D Presets
• DICOM Server Configuration
• Settings
• Measurement Order
• Obstetrical Tables
•Protocols
• General
• Preset Assignments
• Measurement Customization
•Worksheets
•Banners
• SonixHUB Worksheets
• General Protocol.
Note: If the system boots properly with all User Data intact, then it will not be necessary to import this data.
Note: General is the only Protocol available on SonixTablet systems.