SonixTablet Service Manual 00.053.129, Revision C Chapter 5: Software
5-3
5.2 PATIENT DATABASE REPAIR
This option is to be used only if the patient database becomes corrupted.
To Repair the Patient Database:
1. Tap the touch screen button.
2. Select Administrator > Patient > Repair Database.
3. Select OK to exit.
5.3 SYSTEM RECOVERY
Before performing a system recovery, consult an Ultrasonix Technical Support Representative as this should only be done as
a last resort. Technical Support will provide you with the appropriate documentation to carry out a system recovery.
Caution: Backup patient data on a regular basis (7.1 Protecting Patient Data).
Caution: System Recovery can erase all
Patient/Exam data on the hard drive!
To Next Page
Loading...
