Chapter 9: Network Configuration 00.053.129, Revision C SonixTablet Service Manual
9-2
Table 9-1: Network Settings
Network Setup
Internet Connection Using LAN
OR
Dialup Internet Connection
Select Internet Connection type: LAN or Dialup.
Account
Information
Phone Number
If Dialup was selected in the previous step, enter the telephone number for the Internet
Service Provider (ISP).
User Name Enter the User Name for the Dialup ISP account.
Password Enter the Password that will protect the Dialup connection to the Internet.
Timeout (Seconds)
Enter the Timeout limitation (in number of seconds).
Note: If the system fails to connect within the prescribed time limit, it will stop trying.
Connect Select to Connect using the Dialup settings.
TCP/IP Settings…
Select to configure TCP/IP Settings. Refer to 9.1.1 Ethernet (LAN) Network
Configuration for details.
Wireless Settings…
Select to configure Wireless Settings. Refer to 9.1.3 Wireless Configurationfor details.
Note: Not available on the SonixOP platform.
Online Support
Enabled Select this checkbox to enable Online Support.
Add
Use to Add extra, non-Ultrasonix Online Support IP addresses.
Note: Ultrasonix Online Support addresses are added automatically.
Delete Use to Delete extra, non-Ultrasonix Online Support IP addresses.
Remote Support
After receiving a PIN (Personal Identification Number) from Ultrasonix, use this option to
connect to the Internet. This will allow an Ultrasonix Support technician to remotely access
the system to resolve any issues that may have arisen.
Local IP Address
When using Streaming Video, it is necessary to advise the recipient of the system's Local
IP Address.
Note: During Streaming Video, this Local IP Address can be accessed temporarily by
selecting the Streaming Video icon on the LCD display.
For details on Streaming Video and its associated icon, refer to SonixLIVE Setup in
the relevant User Manual.
If the system is not connected to a network, instead of a Local IP Address, the field
will read No Network Available.
Note: Not available on the SonixOP platform.
E-Mail
Setup
Server Address Enter the Outgoing (SMTP) Server Address here.
Server Port Enter the Outgoing Server Port number here.
Note: Ultrasonix recommends that Network connections be configured using the settings provided by your IT Department.