Page 47
Test Params – Sub-Parameter Menu
Sprint LC testers have one secondary menu used to set additional
parameters for each test type. The word “GoTo” on the main parameter
menu indicates that a sub-parameter menu is available. To access the test
parameters pop-up menu, highlight the “Test Params” line and then press
the GoTo (INCREMENT) keypad. The next page describes what Sprint LC
shows when the pop-up menu is displayed.
Figure 19
Back Prev Next Inc Dec
PROGRAM 1
Test Type PD
Test Press. 10.000 psig
Press. Error .5 psig
Coupling GoTo
Test Params GoTo
Next Program 0
To Next Page
Loading...
