Page 68
Units of Measure
Sprint LC can display pressure, flow and time in several different
engineering units—and the tester does all the conversions for you. Change
from ml/sec to cc/hr without using a scientific calculator or a conversion
chart.
It is permitted to program in English units even though test results need to
be displayed to operators in metric units. Sprint LC allows selecting
English units of measure (psig), to program a test, then return to the Units
menu to select metric units. Product testing can then be conducted with
results displayed in metric format although programming was done in
English units.
Changing Units
Turn the LOCKOUT keyswitch to program mode. Measurement units are
set in the menu called Engineering Units, which is reached through Units
on the setup menu.
POSSIBLE UNITS
Pressure psig, mbar, inH
2
O, mmH20,
inHg, mmHg, Kpa, Kg/cm2
Volume cc or ci (cubic inches)
Flow Volume cc, ml, l
Flow Time sec, min, hr
To Next Page
Loading...
