Page 70
Serial Port
Sprint LC communicates with computers and peripherals over a standard
RS-232 port by using any third-party communication program. Use the
RS-232 port to transfer test data from Sprint LC to a personal computer or
directly to a serial printer. Data transferred is in tab delimited ASCII
format.
Use any communication program desired such as Crosstalk, Procomm,
Kermit, or Winwedge and connect to any serial device such as computers
made by Hewlett Packard, IBM, or Apple. Connect the null-model RS-232
cable to the Sprint LC port labeled RS-232 IN.
Pins used: transmit, receive, and ground. See Figure 34
When importing a test data file into a commercial spreadsheet program,
accept the data file produced by Sprint LC in tab delimited format using
the spreadsheet’s import option.
Available Data
At the end of a test or test series, available information varies depending
on tests that ran.
Pressure Decay or Occlusion Data
f Cycle number from the Tested box
f Program number
f Test type (pressure decay, occlusion, flow, or burst.)
f Test value from the main digital readout
To Next Page
Loading...
