Page 63
Main digital readout
during test.
Main digital readout
after
end of test.
FIGURE 27
Value held on Main digital readout
at end of test
Pressure Decay Total amount of pressure drop
measured at end of test time.
Flow Final flow measured at end of test
time.
Burst Peak pressure attained during the
test.
PD .0 PASS
Mode Test Time Status
PROGRAM 1
Test Press. Tested Reject
9.993 psig 1 0
psig
PD 1.2 TEST
Mode Test Time Status
PROGRAM 1
Test Press. Tested Reject
9.993 psig 0 0
psig
.003
To Next Page
Loading...
