User's Guide ______________________________________________________________________
128 _________________________________________________________________ M211296EN-A
3. Enter the following commands:
/> paramset hosts:<server>:smtp username <username>
/> paramset hosts:<server>:smtp password <password>
where
<server> = Name of the operator SMTP server
<username> = Username to use for login
<password> = Password to use for login
For example:
/> paramset hosts:mail.inet.fi:smtp username me
/> paramset hosts:mail.inet.fi:smtp password mysecret
4. Close the service connection by selecting from the menu
Maintenance - Terminal Disconnect.
To enable sending messages via eMail server, use the following
parameters described in on page 119 and Table 25 on page 121:
- csv_to_email
(1
- sms_to_email
(1
- table_to_email
(1
- alrmet_to_email
- alrtech_to_email
(1
You are allowed to select only one observation message type for eMail
transmission.
Set the interval of the selected observation message type by (see Table 23
on page 118):
- csv_interval
- sms_interval
- table_inte
rval
To Next Page
Loading...
Need help?
General
