104 © Vbrick Systems, Inc.
Once you have successfully configured the DME to interface with Rev, you may perform the
integration features that have been implemented for Rev. For more details on those
functions, view the Rev Integration Functions help topic.
Rev Integration Functions
API Key An API key that is created through the Vbrick Rev interface. This key
must match the key that is created for the device in Rev’s Device
module for the DME.
Please note that the API key may not contain the special
characters `"]%&+'<
Default User Used to define the Uploader metadata attribute when using Rev’s
POST uploads/videos API to upload VOD files to Rev. This is
normally used when the “no metadata” field is specified in the
corresponding JSON file or anytime the Uploader field is not present
in the JSON file. It is good practice to specify an Uploader to your
video file so it is recommended that the JSON file contain this field
or that you use the DME Default User field to specify the Uploader.
If no value is specified in this field, the DME will supply a default
value of “DME”.
Important: Whatever value is specified in this field, a valid Rev user account
must match that value. For example, if the default value of "DME" is used,
a Rev user name of DME must also be present.
See: Required File Types for Bulk Video Upload topic for details.
Default Folder to
Store Media
If your DME is designated as a VOD storage device in Vbrick Rev,
the folder content will be stored in for later access and playback.
MAC Address The MAC Address of your DME device. Vbrick Rev will ask for this
address when you add your DME as a device in Rev’s Device module.
Retry Rev Uploads Click to manually restart a bulk VOD ingestion process to Rev if it
fails for any reason. See: Start a Bulk Video Upload to Rev topic.
Field Description
To Next Page
Loading...
General