Input Stream Configuration
DME Admin Guide 117
Transport Stream In
To access the Transport Stream In fields:
1. Navigate to
Input Configuration > Transport Stream In.
Use this page to configure streams pushed via unicast or multicast to the Multi-Protocol server using
transport stream. The number of streams supported depends on the model of the DME.
MPG2TS Streams
The DME can accept a live unicast or multicast MPEG2TS (with an MP2 or MP4 H264
payload) and deliver it from the DME as unicast or multicast. (A live MPEG2TS is typically
pushed from a a VB6000/7000/9000 Vbrick MPEG-2/H.264
encoder or another DME.)
Log this playlist's
activity
Log this playlist's activity in the
Access History log.
Send this playlist to a
broadcast server
• Hostname or IP Address – enter server host name or IP address
of broadcast server.
• User Name – enter valid administrator name on broadcast
server.
• Password – enter valid administrator password on broadcast
server.
Field/Icon Description
To Next Page
Loading...
General