SAP Configuration
DME Admin Guide 111
SAPs for Unannounced Streams
To access the SAPs for Unannounced Streams fields:
1. Navigate to
SAP Configuration > SAPs for Unannounced Streams.
Use this page to enable SAPs for streams which have been configured for input to the DME
using Unannounced Unicast/Multicast (In-8). This is not a common configuration and it is
recommended that an alternate input method be utilized if possible.
Send SAP for Internal IP Destination IP address of the Multicast Announcement for
Stream Announcements. Most commonly for multicast, but can
be unicast for direct transmission to, for example, a VEMS
Mystro server.
Send SAP for NAT'ed IP Send a SAP for the natted IP address configured on the System
Configuration >
Network page.
IP Address Actual IP address of the SAP announcement.
Port Announcement Destination Port.
Transmit Interval How often the Announcement is transmitted in seconds.
Time to Live For unicast, the number of hops (between routers) for which an
IP packet is valid in the network. For multicast, the distribution
scope of the SAP.
Differentiated Services Value that instructs (capable) routers on how to handle a packet.
These are generally quality of service items. This is typically set
to all zeros.
See
Differentiated Services on the Streaming topic.
Author Optional author information
Copyright Optional copyright information
Announce SAP Fields Description
To Next Page
Loading...
General