110 © Vbrick Systems, Inc.
Management SAP Fields Description
Transmit Enable Check to enable transmit for management SAPs. Default =
Enabled.
Group Name Optional. This parameter is included in the Management SAPs
used by VBDirectory. It is used for organizing Vbrick devices
into groups to simplify use of VBDirectory.
Unit Number Optional. The appliance unit number (range 0–2147483647) is
used to identify each DME in a group.
Retransmit Time Defines the Management SAP retransmit time.
Time To Live For Unicast, the number of hops (between routers) for which an
IP packet is valid in the network. For multicast the distribution
scope of the SAP.
Differentiated Services
Differentiated Services Code Point (DSCP) field in the header of
IP packets for packet classification purposes. DSCP replaces the
three bit
Type of Service byte of the IP header.
See
Differentiated Services on the Streaming topic.
IP Address Defines the Destination IP Address for Management SAPs.
Port Defines the Destination Port for Management SAPs.
Announce SAP Fields Description
Announce Enable Enables configuration of the announcement.
To Next Page
Loading...
General