160 © Vbrick Systems, Inc.
You can initiate a call by enabling Call Line and clicking Apply or OK or by using the Call
button on the Outgoing Lines page. Either method will auto connect with the configured
video conferencing endpoint (i.e. the
Destination Identity).
Create or Edit a VC Gateway Incoming Line
Defaults
To access the VC Gateway Defaults fields:
1. Navigate to
VC Gateway Configuration > Defaults.
Use this page to set SIP defaults for many of the parameters on the incoming and outgoing
line detail pages.
Note that any changes you make on this page do not affect existing lines. Changes made on this
page will apply only to "new" incoming or outgoing lines.
Field Description
Destination Identity The name and IP address of the videoconferencing destination
endpoint in the format shown. This is the identifier the DME will
use to call into the remote videoconferencing unit:
sip:name@<destination_ip_address> (or <host name>).
Proxy Address Optional field to list the IP address of a proxy server if one is
required.
Auto Call Line Automatically initiates a call when you check the box and click
OK or
Apply.
To Next Page
Loading...
General