122 © Vbrick Systems, Inc.
Flash Multicast
To access the Flash Multicast fields:
1. Navigate to
Output Configuration > Flash Multicast.
This page will allow you to convert a stream to Adobe’s Flash Multicast. This protocol can be
played by existing, fielded Flash players removing the need to distribute players for multicast
playback. Vbrick continues to see the necessity and need for multicast within the enterprise
environment and provides Flash Multicast as an alternative for this support.
The most common use case here is for organizations to unicast a stream from a central
location to one or more remote DMEs, where that DME then multicasts to local viewers.
Application The application is defined by the destination. For example, when
sending to another DME, the string should be
live, vbApp, vbrick, or
vod. When sending to a CDN, the string will need to be extracted from
the publishing URL the CDN gives to you.
An example publish to URL from a CDN such as Edgecast is:
rtmp://fso.dca.A3CD.edgecastcdn.net/20A3CD/HLSTest/
vBrick?xZ7q0oCEoQ6hvqp5
Where:
• Target Name =
vBrick?xZ7q0oCEoQ6hvqp5
• Destination = fso.dca.A3CD.edgecastcdn.net
• Application = 20A3CD/HLSTest
Emulate (o) Optional May be required for some destination devices.
swf URL (o) Optional May be required for some destination devices.
Page URL (o) Optional May be required for some destination devices.
User Name Required if client-side authentication is required by the destination
server
Password Required if client-side authentication is required on the destination
server
Enable Use dropdown to enable or disable the stream. All streams are disabled
by default.
Status Read only: Disabled | Streaming | Waiting for Stream (Input source
<stream_name> not yet available.)
DME Model Number of Configurable Output
Streams
7530 25
7550 35
7570 60
Field Description
To Next Page
Loading...
General