DME Admin Guide 145
Chapter 10
User Configuration
Username and Password
To access the Username and Password fields:
1. Navigate to
User Configuration > Username and Password > Administration User
Management section.
Use this page section to change the user name and password (default for both =
admin) for
the DME server (and the FTP server). There is only one user name and password on the
system and this access is not the same as ReadOnly access. If you change the user name and
password, be sure to record the new name and password. If you lose the user name or
password you will be unable to login to the server.
Readonly Username and Password
Caution: Be aware that when you change the user name and password
for the server you are changing the FTP user name and password as
well.
Field Description
Current User Name Enter current user name.
Current Password Enter current password.
New User Name Enter new administrator user name.
New Password Enter new administrator password.
Re-enter New Password Re-enter new password and be sure to click
Change Password.
To Next Page
Loading...
General