DME Admin Guide 67
Chapter 5
System Configuration
Network
To access the Network fields:
1. Navigate to
System Configuration > Network.
Fully Qualified Domain Name (FQDN)
To access the Fully Qualified Domain Name (FQDN) field:
1. Navigate to
System Configuration > Network > Fully Qualified Domain Name (FQDN)
section.
Use this field to configure your
Fully Qualified Domain Name (e.g.,
yourdmehostname.yourcompanydomainn.com).
This name will be shown in the banner graphic at the top right of all the DME Admin UI
configuration pages.
Currently, the FQDN defaults to DME<MAC ADDRESS>.While you can continue to use
this, it is recommended that you change it. Please contact your network administrator to
make sure that this FQDN is registered within your DNS servers for easy access. Also
remember that this FQDN will identify the appliance to various network applications --
including DHCS and the
VBDirectory application.
Caution: Please make sure to enter your FQDN in all lowercase letters.
To Next Page
Loading...
General