Output Stream Configuration
DME Admin Guide 137
Destination Settings
Field Description
Source Hostname or
IP Address
Hostname or IP address of the source server. Commonly this is
127.0.0.1. This is set to an external address only if a stream is being
requested from an external server via RTSP/RTP. Normally RTSP/
RTP requests originate at the Multi Protocol Server (In-6). Each
relay must use a unique source. Each unique source may then have
multiple destinations.
Mount Point SDP file name.
Request incoming
stream
For all normal use cases, this option is selected. Check to request a
stream from another DME or server.
User Name (optional) Name used for authentication on source server. Used only
in the uncommon case of a stream requested from an external server
via RTSP/RTP.
Password (optional) Name used for authentication on source server. Used only
in the uncommon case of a stream requested from an external server
via RTSP/RTP.
Wait for announced
stream(s)
Check to wait for an announced stream from the specified hostname
or IP address. This is an uncommon case.
To Next Page
Loading...
General