EasyManuals Logo

VBrick dme User Manual

VBrick dme
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #167 background imageLoading...
Page #167 background image
VC Gateway Configuration
DME Admin Guide 155
Maximum Call Time Maximum duration for any call after which the system will
automatically hang up. Default = 120 minutes.
Video Resolution Select from dropdown list. Sets the desired video encoding
resolution (the width and height respectively) of the compressed
video stream. Note that the actual resolution is determined by
negotiation between endpoints.
1920x1088 @ 60fps at 4096kbps
1920x1088 @ 30fps at 2048kbps
1280x720 @ 60fps at 2048kbps
1280x720 @ 30fps at 1024kbps
960x544 @ 30fps at 1024kbps
704x480 @ 30fps at 512kbps
704x576 @ 25fps at 512kbps
352x240 @ 30fps at 256kbps
352x288 @ 25fps at 256kbps
P-Mode Packetization mode defines the packetization rule for the
incoming/outgoing stream. Default = standard. Do not change
except as directed.
I-Frame Interval Video conferencing systems typically do not send IDR frames
although they are required for most players. This is the frequency
at which IDR (Intra Dynamic Refresh) frames are inserted.
Default = 5 seconds. Valid range is 1 - 8 seconds.
Audio Bit Rate Select from dropdown: 16K, 32K, 64K.
Activate Line The line cannot be used for a videoconference until it has been
activated. Default = disabled.
Field Description

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VBrick dme and is the answer not in the manual?

VBrick dme Specifications

General IconGeneral
BrandVBrick
Modeldme
CategoryEngine
LanguageEnglish