166 © Vbrick Systems, Inc.
Field/Link Description
Show/Hide Last Set Top
Box Report
Toggle that will display/hide the most recent STB report.
Go To Rev
Communications Log
Displays a list of the most recent Rev interface communications
logs. You may also manually generate new logs from this form.
Refresh STB List Manually refresh the list of discovered STBs.
Filter STB List Filters the list of found STBs.
IP-Address IP address of the STB.
Host-Name Host name of the STB as identified with the MF-STB SAP
message.
Model Software version of the STB. Please use this to identify MF-
STBs that need updating.
S/W-Version Software version of the STB
Last-Report The date and time a report was obtained from the STB. This is a
periodic update, so this value will change.
Status The status of the STB. Possible states are:
• Ok: The STB was accessed successfully by the DME
• Invalid Credentials: The DME could not log-in to the STB
• WebServiceDisabled: Remote access to the STB is disabled
• Error: The operation failed for an unknown reason
Note: Clicking Show/Hide Last Set Top Box Rev Report will show
the formatted information that the DME sends to Rev. This is to be
used in conjunction with Vbrick Customer Support if necessary as
requested.
Clicking Go to Rev Communications Log links to the page where
the DME to Rev interface logs may be viewed. The full logs are also
available within the DME Logs directory. This is also to be used in
conjunction with Vbrick Customer Support if necessary as requested.
To Next Page
Loading...
General