Personal TitleMaker User Guide
120
To play back a specific range of pages:
1 On the Editing Screen, position the cursor anywhere in the
first page of the range you want to play, then press
MARK
START.
2 Move the cursor anywhere in the last page of the range you
want to play, then press
MARK END.
3 Press
PLAY.
4 To stop playback, press
NEW LINE OK or PLAY.
Playback begins with the first marked page (
MARK START), continues
through the last marked page (
MARK END), then begins looping — that
is, after playing the last marked page, the first marked page plays again,
and the sequence repeats continuously.
Video Billboards
You can use the preceding method to play pages as a “video billboard.”
This is useful for point-of-sale presentation, hotel lobby displays, event
schedule displays, or any application that requires a continuously run-
ning program of video titles. Keep in mind that if any of the pages are
set for infinite duration, they remain on the screen until someone
presses
PLAY. To ensure continuous, non-interrupted playback, set spe-
cific time durations for all pages in the project.
Pausing Playback
Pause playback is analogous to the pause or still function on a VCR.
To pause playback of a project at any time:
1 Press the keyboard
SPACEBAR.
mark
end
PLAY
mark
start
…then… …then…
PLAY
Spacebar pauses playback… Play resumes playback
To Next Page
Loading...