Videonics PTM-1 - Lesson 11 • Create Pages Nine and Ten

Personal TitleMaker User Guide
50
LESSON 11
CREATE PAGES NINE AND TEN
Page nine is a blank page exactly like pages four and
six. You should be able to create the page without
any further instructions.
Page ten is The End (but not the final page). The title
transitions down from the top of the screen, pauses
for two seconds, then transitions in the reverse direc-
tion, up to and off the top of the screen. The page
plays against a pixel pattern background.
1 Create page ten immediately following page nine.
2 Type T
HE, press NEW LINE OK, then type END.
3 Press
BACKGROUND/PATTERN and select the pixel pattern
option in the top sub-menu.
4 Press
TAB to go to the second sub-menu, then select pattern
option number 01.
5 Press
BACKGROUND/COLOR, select a dark gray background,
then
PRESS NEW LINE OK.
6 Use
MARK START and MARK END to mark all text on the screen,
then press
FONT/FONT & SIZE to display that menu.
7 Choose font number six (bottom sub-menu), then move to
the top sub-menu.
8 Highlight the right-most option in the sub-menu. This option
increases both the width and height of the characters by a
factor of two.
blank
The
End
Pixel Pattern Icon
Double Font Width and Height Icon