Chapter 3 Getting Started
31
RUNNING THE PERSONAL TITLEMAKER DEMO
Personal TitleMaker contains a demonstration project created by Vide-
onics. The demo has two primary purposes:
• Shows many of the effects you can create in your own produc-
tions; and,
• Provides boilerplates you can use as a starting point to create
pages and titles.
The following section explains how to start the demo, view it, then stop
it. You can control the demo in many different ways. To learn more, see
Appendix A, Personal TitleMaker Demo.
Your equipment must be functioning correctly to run the demo. If you
have not yet installed your equipment and Personal TitleMaker, see
Chapter 2, Installation Procedures.
To run the demo:
1 Press the
POWER DEMO key to apply the power if not already
applied.
2 Press
ACCENT+POWER DEMO.
The demo begins playing immediately. If it doesn’t, check all
cable connections as well as the power supply connection. If
necessary, retrace the installation steps as described in
Chapter 2, Installation Procedures.
3 When you finish viewing the demo, press any key to stop it
and return to normal processing.
accent
POWER
DEMO
+
To Next Page
Loading...