Chapter 4 Personal TitleMaker Tutorial
37
5 Press UP ARROW to move the cursor up to the project header
line so you can enter a name for the new project.
The blinking cursor appears just to the right of the left square
bracket ([). At the far right end of the line is a square right bracket
(]).
6 Type T
UTORIAL — the name for the project.
Note
When typing title text (such as “Tutorial” above), use any format
you want, such as initial caps, all caps, or all lower case. The
choice is yours.
LESSON 2
CREATE PAGE ONE
Actually, page one is already created for you. Per-
sonal TitleMaker created it automatically when you
created the project. So, what you’ll do in this lesson is
define the attributes (or, characteristics) for the page.
Recall from the diagram on page 35 that the first page
is solid black.
1 Press
DOWN ARROW to move the cursor to the line for page
one, then press
NEW LINE OK to go to the Editing Screen.
You cannot assign page attributes from the Page Index, you must
go to the Editing Screen.
When you arrive at the Editing Screen, the blinking cursor appears
just beneath the page header line, ready for you to begin typing
the title. However, this particular page does not contain a title, so
all you’ll do is set page attributes.
2 Press
BACKGROUND/COLOR to display the Color menu.
3 Press
SHIFT+DOWN ARROW until you see the black color bar
appear in the lower sub-menu.
To Next Page
Loading...