Watlow F4T User Manual

Watlow F4T • 142 • Chapter 5 Function Reference
Input Point 1
Set the minimum input value to be scaled. This value and all lesser values are scaled to Out-
put Point 1.
Range: -99,999.000 to 99,999.000
Output Point 1
Set the value to which the input is scaled when the input is equal to or less than Input Point
1.
Range: -99,999.000 to 99,999.000
Input Point 2
Set the second lowest input value on the scaling curve. This value is scaled to Output Point 2.
Range: -99,999.000 to 99,999.000
Output Point 2
Set the value to which the input is scaled when the input is equal to Input Point 2.
Range: -99,999.000 to 99,999.000
Input Point 3
Set the third lowest input value on the scaling curve. This value is scaled to Output Point 3.
Range: -99,999.000 to 99,999.000
Output Point 3
Set the value to which the input is scaled when the input is equal to Input Point 3.
Range: -99,999.000 to 99,999.000
Input Point 4
Set the forth lowest input value on the scaling curve. This value is scaled to Output Point 4.
Range: -99,999.000 to 99,999.000
Output Point 4
Set the value to which the input is scaled when the input is equal to Input Point 4.
Range: -99,999.000 to 99,999.000
Input Point 5
Set the fifth lowest input value on the scaling curve. This value is scaled to Output Point 5.
Range: -99,999.000 to 99,999.000
Output Point 5
Set the value to which the input is scaled when the input is equal to Input Point 5.
Range: -99,999.000 to 99,999.000
Input Point 6
Set the sixth lowest input value on the scaling curve. This value is scaled to Output Point 6.
Range: -99,999.000 to 99,999.000

Watlow F4T Specifications

General

Inputs	Thermocouple, RTD, mA, V
Outputs	Relay, SSR, mA, V
Communication	Ethernet, Modbus RTU
Data Logging	Yes
Certifications	CE, UL, cUL, RoHS
Control Modes	PID, On/Off
Power Supply	100 to 240 VAC
Operating Temperature	0 to 50°C
Enclosure Rating	IP65
Display	4.3 in. (109 mm) color touch panel LCD
Control Loops	Up to 4