Watlow F4T User Manual

Watlow F4T • 173 • Chapter 5 Function Reference
Enable/Disable Profile
Connect the DIS receiver to a digital device to enable or disable the profile engine.
Options:
• On: the profile engine is disabled while the signal is on and is enabled while the signal
is off
• Off: the profile engine is disabled while the signal is off and is enabled while the signal
is on
Event 1
Indicates the state of event 1 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on
Name
Set the name to display for event 1 in the controller user interface and in the profile editor.
Options:
• Any alphanumeric character (20 maximum)
Event 2
Indicates the state of event 2 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on
Name
Set the name to display for event 2 in the controller user interface and in the profile editor.
Options:
• Any alphanumeric character (20 maximum)
Event 3
Indicates the state of event 3 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on
Name
Set the name to display for event 3 in the controller user interface and in the profile editor.
Options:
• Any alphanumeric character (20 maximum)

Watlow F4T Specifications

General

Inputs	Thermocouple, RTD, mA, V
Outputs	Relay, SSR, mA, V
Communication	Ethernet, Modbus RTU
Data Logging	Yes
Certifications	CE, UL, cUL, RoHS
Control Modes	PID, On/Off
Power Supply	100 to 240 VAC
Operating Temperature	0 to 50°C
Enclosure Rating	IP65
Display	4.3 in. (109 mm) color touch panel LCD
Control Loops	Up to 4