Watlow F4T User Manual

Watlow F4T • 174 • Chapter 5 Function Reference
Event 4
Indicates the state of event 4 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on
Name
Set the name to display for event 4 in the controller user interface and in the profile editor.
Options:
• Any alphanumeric character (20 maximum)
Event 5
Indicates the state of event 5 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on
Name
Set the name to display for event 5 in the controller user interface and in the profile editor.
Options:
• Any alphanumeric character (20 maximum)
Event 6
Indicates the state of event 6 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on
Name
Set the name to display for event 6 in the controller user interface and in the profile editor.
Options:
• Any alphanumeric character (20 maximum)
Event 7
Indicates the state of event 7 and allows the output to be forced when the profile engine is
not running a profile.
Options:
• Off: the event is off
• On: the event is on

Watlow F4T Specifications

General

Inputs	Thermocouple, RTD, mA, V
Outputs	Relay, SSR, mA, V
Communication	Ethernet, Modbus RTU
Data Logging	Yes
Certifications	CE, UL, cUL, RoHS
Control Modes	PID, On/Off
Power Supply	100 to 240 VAC
Operating Temperature	0 to 50°C
Enclosure Rating	IP65
Display	4.3 in. (109 mm) color touch panel LCD
Control Loops	Up to 4