Watlow F4T • 327 • Chapter 6 Appendix
Declaration of Conformity
Series EZ-ZONE
®
Flex Modules
WATLOW Electric Manufacturing Company ISO 9001
since 1996.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following products:
Designation:
Series EZ-ZONE
®
Flex Modules
Model Numbers:
FMLA-(LAJ, LCJ, LEJ, MAJ, MCJ, MEJ, YEB
1
)A-A(A
1
,F
1
,B
1
,G
1
)XX
FMMA-X(A
1
,C
1
,E,F
1
,K)(A
1
,C
1
,H,J,K)A-A(A
1
,F
1
,B
1
,G
1
)XX
FMHA-(R
1
,P
1
,C
1
,F
1
,B
1
,J,K,L
1
)AAA-A(A
1
,F
1
,B
1
,G
1
)XX
1
FMCA-XAAA-A(A
1
,F
1
,B
1
,G
1
)XX; Note: X
1
= Any letter or number
Classification: FMLA, FMMA and FMHA are Process Control modules, FMCA are
Communication modules; Modules are Integrated Controls in either EZ-
ZONE
®
CC or F4T Bases; Modules are IP10 when properly installed.
Rated Voltage and Frequency: Relay, SSR or No-Arc Control outputs 24 - 240 Vac 50/60 Hz,
Switched DC, Process and communications; low voltage SELV
Rated Power Consumption: At max 50°C, see manual for ratings at other ambient temperatures.
No-arc relays 15A 1.C, Dual SSR module 1.C 10A each output,
Mechanical relay 5A 125 VA, 25 VA at 24 Vac 1.B, Discreet SSR 1/2A
1.C 20VA, Quad SSR 1.C 0.7A 50 VA, Hex I/O 1.5A, all others SELV
limited energy.
Flex Modules are considered components and have no function in and of themselves, it is only when installed in a
Watlow EZ-ZONE
®
CC or F4T Base enclosure that they have useful function. Modules were tested as part of these
systems for compliance with the following directives.
2004/108/EC Electromagnetic Compatibility Directive
EN 61326-1 2006 Electrical equipment for measurement, control and laboratory use
– EMC requirements (Industrial Immunity, Class B Emissions).
2006/95/EC Low-Voltage Directive
EN 61010-1:2010 ED3
All FM’s in all bases are
compliant with this standard.
Safety Requirements of electrical equipment for measurement,
control and laboratory use. Part 1: General requirements
EN 60730-1:2011
EN 60730-2-9:2010
1
Compliant output options.
When in EZ-ZONE
®
CC Base.
Automatic electrical controls for household and similar use –
Particular requirements for temperature sensing controls.
Only certain output options comply with 60730 spacing and dielectric
requirements, see order information for compatible models.
Compliant with 2011/65/EC RoHS2 Directive
Per 2002/96/EC W.E.E.E Directive and 2006-66-EC Battery Directive
Please Recycle Properly.
See the Declarations of Conformity for Watlow EZ-ZONE
®
CC and F4T models
for further details on standards used for compliance.
Joe Millanes Winona, Minnesota, USA
Place of Issue
Name of Authorized Representative
Director of Operations
July 2014
Title of Authorized Representative Date of Issue
Signature of Authorized Representative
To Next Page
Loading...
Need help?
General
