Watlow F4T User Manual

Watlow F4T Controller • 42 • Chapter 2 Configuration Using Composer
Enabling Data Logging Within a Profile
To enable data logging when running a profile: 5
th
character of the part number must be [J,
K, L or M], while the 7
th
digit must be [D, E or F]. To learn more about data logging see "Da-
ta Logging" in the Overview Section of this User Guide.
To enable data logging within a profile:
1. Click on the Device Name (yellow
circle) tab and then Profiles.
2. Click on the desired profile and
then check the box next to "Log
data while this profile is running"
(red box).
Note:
All captured data points for the profile
must first be configured within the Da-
ta Logging menu. See Setting Up Data
Log Files Using Composer.

Watlow F4T Specifications

General

Inputs	Thermocouple, RTD, mA, V
Outputs	Relay, SSR, mA, V
Communication	Ethernet, Modbus RTU
Data Logging	Yes
Certifications	CE, UL, cUL, RoHS
Control Modes	PID, On/Off
Power Supply	100 to 240 VAC
Operating Temperature	0 to 50°C
Enclosure Rating	IP65
Display	4.3 in. (109 mm) color touch panel LCD
Control Loops	Up to 4