Operation 72800115 Markoprint X4JET
Seite 101 von 177 GB
Backup at USB stick
1. Connect the Markoprint X4JET USB stick to the USB-A sleeve on the side.
2. Touch the iLOGIK once in one of the status menu.
The print image submenu is displayed.
3. Call the Service submenu by rotating the iLOGIK and select it by pressing.
The Reset ink counter submenu is displayed.
4. Call the USB-Stick submenu by rotating the iLOGIK and select it by pressing.
The display USB Markoprint X4JET is shown.
5. Select how you like to store by rotating the iLOGIK
USB Markoprint X4JET or Markoprint X4JET USB
6. The following storage options are displayed by rotating the iLOGIK:
Texts
Fonts (types)
Parameter (settings)
Backup (Data backup)
Confirm the selection by pressing the iLOGIK.
7. Place the check box to the tick by rotating the iLOGIK and confirm it by pressing.
Time / Date
In this menus time and date can be adjusted.
1. Touch the iLOGIK once in one of the status menus.
The Label submenu is displayed.
2. Call the System submenu by rotating the iLOGIK and select by pressing.
The Date/Time submenu is displayed.
3. Touch the iLOGIK once and set up to print by rotating, select by pressing, or tick that the
time and date will be retained.
4. Adjust the respective positions, i.e. adjust the hours by rotating the iLOGIK and select by
touching. The minutes and the date will be set by the same procedure.
5. After all the settings have been carried out set the check box to tick for confirmation and
accept by touching the iLOGIK.
To Next Page
Loading...
Need help?
General
