Operation 72800115 Markoprint X4JET
Seite 106 von 177 GB
Web-Interface
There is the option to make settings on the Markoprint X4JET by the Web browser via a
PC, which is connected with the Markoprint X4JET.
On this the IP of the respective system has to be entered in the address bar of the Web
browser.
Possibly other settings had to make on the PC to have access to the IP address.
(System administrator)
The system IP can be read or rather set up on the system directly.
Chapter IP address and IP mask, Page 104
Fig. 40: User interface Web-Interface
To set up the parameters, please enter the username: „user“ and a password „1234“.
If you cannot change the parameters, the functions are not unlock, i.e. HiSpeed in the
Advanced version.
Layouts can’t be created with the WEB interface.
The Web interface don’t support all function!
To Next Page
Loading...
Need help?
General
