Weber Markoprint X4JET - Nameplate Controller; Nameplate Print Head

Technical data 72800115 Markoprint X4JET
Seite 24 von 177 GB
Nameplate controller
The nameplate is attached to the bottom of the device and displays the following:
 System type
 Serial number
 Supply voltage
 Power consumption
 Address of manufacturer
Fig. 1: Nameplate controller
Nameplate print head
The nameplate is attached to the side of the print head and displays the following:
 System type
 Serial number
 Supply voltage
 Power consumption
 Address of manufacturer
Fig. 2: Sample Nameplate HP Print head
System X4 JET
Ser. No. K09010 – X4
Volt 100 – 240 /50Hz
Power 100W / 2A
Weber Marking Systems GmbH
Maarweg 33
D - 53619 Rheinbreitbach
System HP 2.5-1
Ser. No. H10537 - CSK
Volt 30V DC
Power 5W
Weber Marking Systems GmbH
Maarweg 33
D - 53619 Rheinbreitbach