Assembly and function 72800115 Markoprint X4JET
Seite 36 von 177 GB
Assembly and function
Brief description
The Markoprint X4JET of Weber Marking Systems GmbH is a controller, which can drive
ink jet print heads for product identification. The Markoprint X4JET can control both
thermal and piezoelectric print heads.
The Markoprint X4JET permit a wide range of print images on products, i.e. product
descriptions, graphics, quantities, best before dates, barcodes and serial number.
Print layouts can be created with the included iDesign software and can send via
network connection or USB interface or USB stick to the Markoprint X4JET.
The Markoprint X4JET is available as standard version Advanced and as Pro-Version
with extended functions.
Functions X4 JET Advanced:
Print speed up to 90m/min with HP at 300dpi, counter, date with best before, variable
input, 2D barcodes, 1m print length (up to 2 m at 300 dpi without zoom optimization),
data backup with USB-Stick, interface functions, data base connection.
Functions X4 JET Pro:
Like iJET Advanced extra: Hi-Speed adjustable with print speed up to 240 m/min with LX
at 300 dpi, up to 3m text length (up to 2 m at 300 dpi without zoom optimization),
password protection.
The Markoprint X4JET control systems will be delivered as Advanced version standard.
If the requirements exceed the scope of services of the Advanced version, an upgrade
with costs to the Pro version is available. See also Chapter Software upgrade, page
139.
To Next Page
Loading...
Need help?
General
