Weber Markoprint X4JET - Operating Conditions

Technical data 72800115 Markoprint X4JET
Seite 20 von 177 GB
Supply voltage
The switching threshold of the inputs is 12V ± 2V.
The sensors / encoders must be designed for 24V operating voltage. E.g. 24V + - 10%
or 10V – 30V
The inputs are NPN as standard, but can be rejumpered to PNP with the iDesign
software.
Operating conditions
Environment
Specification
Value
Unit
Temperature range
5 to 45
°C
Relative humidity, maximum
(non-condensing)
10 to 90
%
Duration
Specification
Value
Maximum operating time
The device is designed for
continuous operating.