Weber Markoprint X4JET - Storage controller; Storage HP print heads; Storage LX print heads

Transport, packaging and storage 72800115 Markoprint X4JET
Seite 29 von 177 GB
Storage
Packages may have additional storage instructions exceeding the requirements
listed here. Observe such notes.
Storage controller
Store the controller under the following conditions:
 Do not store outdoors.
 Keep dry and free of dust.
 Do not expose to aggressive media.
 Keep away from direct sunlight.
 Avoid mechanical shock.
 Storage temperature: 5°C to 45°C.
 Relative humidity: maximum 60 %.
Storage HP print heads
Before storage of the HP print heads please remove the ink cartridges and store them
like you can see under the point Storage HP ink cartridge.
Store the print heads under following conditions:
 Do not store outdoors.
 Keep dry and free of dust.
 Do not expose to aggressive media.
 Keep away from direct sunlight.
 Avoid mechanical shock.
 Storage temperature: 5°C to 45°C.
 Relative humidity: maximum 60 %.
Storage LX print heads
Before storage of the LX print heads please remove the ink cartridges and store them
like you can see under the point Storage LX ink cartridge.
Store the print heads under following conditions:
 Do not store outdoors.
 Keep dry and free of dust.
 Do not expose to aggressive media.
 Keep away from direct sunlight.
 Avoid mechanical shock.
 Storage temperature: 5°C to 45°C.
 Relative humidity: maximum 60 %.