Operation 72800115 Markoprint X4JET
Seite 88 von 177 GB
To set up the print start delay,
1. Touch the iLOGIK once in one of the status menus.
The Label Submenu is displayed.
2. Call the Parameter Submenu by rotating the iLOGIK and select by pressing.
The Print Delay Submenu is displayed.
3. The Print Delay submenu is called by pressing the iLOGIK. Set the desired value by
rotating the iLOGIK and confirm by briefly pressing.
To Next Page
Loading...
Need help?
General
