WEG CFW-09 - Parameters Related to the Serial Communication

311
CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
8.13.5.3
Parameters Related
to the Serial
Communication
Parameternumber
P220
P221
P222
P223
P224
P225
P226
P227
P228
P308
Parameter description
Local/Remote selection
Local reference selection
Remote reference selection
Local forward/reverse selection
Local Start/Stop selection
Local JOG selection
Remote forward/reverse selection
Remote Start/Stop selection
Remote JOG selection
Inverter address on the Serial communication network
(range values from 1 to 30)
2) Inverter:
JOG enabling (provided P225 = 3 to LOC or P228 = 3 to REM)
1) Master:
EOT G STX 0
0
8
0 3
= 0
H
8
H
0
H
8
H
ETX
BCC
C. L. Code
JOG active = 1
add. 7
2) Inverter:
G
ACK
Fault Reset
1) Master:
EOT G STX 0
0
8 0 3 = 8H 0H 8H 0H ETX
BCC
C. L. Code
RESET= 1
add. 7
2) Inverter:
Table 8.22
- Parameters related to the serial communication
G
ACK
G
ACK
For further information aboutthe parameters above, refer to chapter 6 - Detailed
Parameter Description.