CFW-09 OPTIONS AND ACCESSORIES
This chapter describes the optional devices that are available for the CFW-09
and the accessories that may be necessary in specific applications. Options
include the Expanded I/O Boards (EBA/EBB), LED-only Keypad, Remote
Keypad and Cables, Blank Cover, RS-232 PC Communication kit, The
accessories comprise: Encoder, Line Reactor, DC Bus Choke, Load Reactor
,boardsforFieldbuscommunication,kitforextractableassembling,
NEMA 4X/IP56 line, HD and RB and PLC board line.
TheI/O expansion boards expand thefunction of theCC9controlboard. There
are four different I/O expansion boards available and their selection depends
on the application and extended functions that are required. The four boards
be usedsimultaneously. The difference between EBAandEBB option
analog inputs/outputs.TheEBC1 boardis used for theencoder
connection.TheEBEboard isforRS-485andmotorPTC.
of each board is provided below.
The EBA board can be supplied in different configurations, combining some
specific features. The available configurations are show on table 8.1.
The use of the RS-485 serial interface does not allow the use of the standard
RS-232 input - they can not be used simultaneously.
- EBA board versions and included features
Differential input for incremental encoder with isolated internal 12 V power
Buffered encoder output signals: isolated input signal
Analog differential input (AI4): 14 bits (0.006 % of the full scale range), bipolar:
V, (0 to 20) mA/(4 to 20)
2 Analog outputs (AO3/AO4): 14 bits (0.006
V to + 10 V, programmable;
Input (DI7): isolated, programmable, 24
2 isolated Open Collector transistor outputs (D
To Next Page
Loading...
