WEG CFW-09 - CHAPTER 1 Safety Notices on the Product; Safety Notices in the Manual; Preliminary Recommendations

35
SAFETY NOTICES
This Manual contains all necessary information for the correct installation
and operation of the CFW-09 Variable Frequency
Inverter.
The CFW-09 Instruction Manual has been written for qualified personnel
with suitable training or technical qualifications to operate this type of
equipment.
The following Safety Notices will be used in this Manual:
DANGER!
If the recommended SafetyInstructions are not strictlyobserved, it can lead
to serious or fatal injuries of personnel and/or equipment damage.
ATTENTION!
Failureto observe therecommended Safety Procedurescan lead to materi-
al damage.
NOTE!
The content of this Manual supplies important information for the correct
understandingof operationandproper performance of theequipment.
The following symbols may be attached to the product, serving as Safety
Notice:
High Voltages.
Components are sensitive to electrostatic discharge. Do not touch
them without following proper grounding procedures.
Mandatory connection to ground protection (PE).
Shield connection to ground.
DANGER!
Only qualified personnel should plan or implement the installation, startup,
operation and maintenance of this equipment. Personnel must review this
entire Manual before attempting to install, operate or troubleshoot the
CFW-09.
These personnel must follow all safety instructions included in this Manual
and/or defined by local regulations.
Failure to complywith these instructions may result in personnel injuryand/
or equipment damage.
1.3
PRELIMINARY
RECOMMENDA
TIONS
1.2
SAFETYNOTICES
ON THE PRODUCT
CHAPTER
1
1.1
SAFETYNOTICESIN
THE MANUAL