Maintenance2751−1/A1
Winterthur Gas & Diesel Ltd.
8/ 8
6. Other Materials
Products of other manufacturers that have the specifications given below, are also
permitted. Materials that:
D Contain no acid, e.g. no acetic acid
D Are resistant to oil, marine diesel oil, heavy fuel oil and water at a permanent
temperature of approximately 100_C.
D Have a short age-curing time, i.e. a minimum of 24 hours in accordance with ISO
standard reference conditions
D Flow easily to fill annular spaces and prevent voids
D Have good adhesion on adhesive-primed metallic surface
D Are easy to prepare and mix
D Have none or minimum surface shrinkage
D The jointing compound must stay in an elastic condition.
2015
Removal and Installation of Exhaust Valve, Replacement of Elastic Studs
To Next Page
Loading...